Superyacht Rubbish is proud to be the exclusive Superyacht distributor for the EV-3000i a revolutionary, compact domestic steam device.
Using only water, the device heats up to 170-degree c and 7 bar of pressure. The device also includes a number of interchangeable modular cleaning heads. This allows for environmentally cleaning to be taken place on all non-delicate items on board, areas perfect for the device include:
- Interior – Galleys, Tender Bays, Tenders and Toys
- Exterior – Deck Furniture, glass, outdoor furniture, stainless steel, carbon fibre, teak decking & gangways etc..
- Engine Rooms – Walls, control rooms, walkways, ipx65/68 products.
*** NO CHEMICALS – JUST WATER ***
We have used the month for now approaching 2 months and I have to admit that the advantage of having this machine onboard is there. The wooden floors, resin and glass. Another thing worth to note is you can easily pull the machine around with you and not scratch the boat! Will be recommending this to other yacht-owners.
Purser – 100M Private M/Y
Implementing the steamer David introduced to us on our yachts proved to be a great choice. Just a fantastic machine in all areas of the yacht. The galley, the deck, cabins and the toys. It saves our crew ample time. 100% Recommend.
Captain – 43M Private S/Y
Good morning, I just wanted to send you a couple of words regarding the EV3000i machine. We have been used the machine for the last month and a half and I have to admit that is really an advantage to have it onboard for interior, deck and galley. The machine is extremely useful for quick and effective polishing of many of the surfaces/material: stainless steel, glasses, mirrors. We have also used the machine for the wood floors (EV1) to give a quick clean. All the curtains have been refreshed with the extension spare part. We had also great results on deck stainless steel, teak and in the galley (ovens, sinks and pans). With the power of the steams it allows the job to be done quickly and without too much physical effort. User friendly, very light can be easily pulled around the boat with no scratches. Thank you for introducing us to such an amazing machine !
Chief Stewardess – 46m MY
Steam cleaners with this feature have two water chambers:
• a pressurized steam boiler;
• a non-pressurized water tank.
That allows the operator to add water into the unit while it’s still running. EV 3000i unlimited autonomy steam cleaner is equipped with an electronic level sensor that refills the boiler when the level of the water inside is not enough. As a result, the unit avoids drops in pressure and temperature during the use.
Elimination of odours and germs
Elimination of odours and germs
Safe storage and transportation on the vessel
Environment and Crew
Benefits to the environment
Protection for crew and passengers
When cleaning certain specific places, sometimes it is necessary to use water along with steam. Most dry steam cleaners take this water directly from the boiler because they do not have the technology to extract the water from the water tank.
This means that when the water from the boiler decreases, the temperature drops very quickly and then using steam becomes impossible after 40-50 seconds. In this case, you shall stop the operation, wait for a few minutes until the temperature in the boiler goes up again and reaches the necessary pressure.
The EV 3000i has an additional water pump for this function when the water ejection is needed.
The water is pumped from the non-pressurized tank and mixes with the steam. Thus, the steam quality, the pressure and the temperature remain unchanged even after 5-10 minutes of operation with this function.
Steam and hot water ejection
Тhe operating pressure of the EV 3000i is 7 bars (101.6 Psi).
This means that the unit maintains this pressure without any fluctuation for two or three minutes of continuous* operation.
The pressure then decreases but is maintained between 4 bars (58 Psi) and 5 bars (72.5 Psi) as indicated in the graphic.
*Continuous operation – when constantly pressing on the steam trigger
EV 3000i ejects 110 g (3.9 oz) steam per minute comparing to others that have maximum 75 g (2.6 oz) steam per minute, even through they claim to have higher starting pressure. The EV 3000i has a very strong steam power, because of the capacity of its boiler.
Steam Dome - Dry Steam, Blue Steam
Steam quality depends of the proper water / steam ratio in the boiler. The water probe is designed to provide the best steam quality.
Steam itself is formed by heating water above 100 °C (212 °F). While using it for cleaning, however, a distinction shall be made between the different types of steam and the respective amount of humidity that they contain.
• From 100 °C (212 °F) to 130 °C (266 °F) – gray steam or steam with high humidity content (up to 80%)
• From 130 °C (266 °F) to 150 °C (302 °F) – white steam or steam with a predominant humidity content (between 50% and 20%)
• From 150 °C (302 °F) to 170 °C (340 °F) – blue steam (or dry steam) with a minimum humidity content (≤ 5%).
The heating elements are made out of Incoloy 800, a material designed for high temperature applications. It resists up to 750 °C (1382 °F) and will not become embrittled even after a long period of use. Each boiler is provided with a specially designed high efficiency heating element that allows a short startup time (14 W/cm2 ). Due to the spiral shape and whole surface coverage EV 3000i uses 100% of the heating efficiency.
E V International and General Vapeur are investing amount of resources every year to im-prove the features of the production. The companies are working with the most important institution like IQ Net, Intertek, Advanced Analytical Technologies, Dekra, etc. E V Interna-tional Ltd. informs you that the quality standards of our production and the security of the customers are guaranteed by the following certificates.